5
Filling the Water Tank
Refilling the Water Tank
Water Usage and Steam Time Guidelines
NEVER fill the tank while the machine is plugged in.
If the unit has been in use, ALWAYS follow these safety precautions before removing the water tank safety cap:
• Switch the unit to the OFF position and unplug the unit. Allow at least 10 minutes for the unit to cool.
• Release all the steam in the unit by pressing the steam nozzle flow trigger (the red safety switch must be in
the ON position).
WARNING: Failure to follow these precautions may result in burns from escaping steam
when the water tank safety cap is removed.
NOTE: Cap will not unscrew until unit is cool.
1 2 3
Fill the tank using the funnel and measuring cup
provided. The tank holds up to 40 oz. /1200ml
of water DO NOT overfill the water tank.
Unscrew the safety cap. Fasten the safety cap tightly into place.
Amount of Water Duration of Steam
13 oz. / 400ml Approximately 15 min.
26 oz. / 800ml Approximately 30 min.
40 oz. / 1200ml Approximately 45 min.
To Next Page
Loading...