7
Assembling and Attaching Accessories
Steam Plate Assembly
NOTE: The steam plate MUST BE assembled before use.
Attaching the Steam Plate to the Steam Gun
Wallpaper Removal
Hold steam plate flat against wallpaper for 20 -30 seconds.
Remove steam plate and scrape steamed section of wallpaper.
Note: For best results it may be helpful to score wallpaper before steaming.
2
Slide the adaptor over the nozzle, aligning the
oval hole with the lock/release button on the
nozzle. Push the button to allow the attachment
to slide into place.
1
The Steam Plate adaptor will attach to either
the steam gun nozzle or extension wand.
Adapter
Diffuser
Disfusing
Slot
Bottom of Plate
1 2
Insert adaptor into opening on the topside of the
plate. Oval shaped opening should face up on
adapter.
Turn steam plate over. Connect diffuser to
adpater. Make certain steam disfusing slot is
facing down toward plate. Firmly attach with
screws.
To Next Page
Loading...