p.8
NO SOUND FROM USB
。Make sure the Broadcaster Audio Input Indicator is Green and audio
is properly output from the USB port.
。
If USB audio source is a PC / Mac, make sure the audio player
software has started playing and audio output is set to USB device
BA210 AV Broadcaster.
。Not all USB port can output audio signal. Some USB ports are for
charging only. Check out the user manual of your device or system
for its USB port capability. The Broadcaster supports USB Audio
Class 1 and 2 (UAC 1.0 / 2.0) only.
。Make sure the USB cable is Charge-and-Data. Charge-Only cable
can only power the Broadcaster and USB audio will be disabled.
To Next Page