Need help?Do you have a question about the HONDA marine BF130A and is the answer not in the manual?
General| Full Throttle RPM Range | 5000 - 6000 RPM |
|---|---|
| Fuel System | Programmed Fuel Injection (PGM-FI) |
| Starting System | Electric |
| Cooling System | Water-Cooled |
| Gear Ratio | 2.33:1 |
| Exhaust | Through Propeller |
| Lubrication | Wet Sump |
| Trim Method | Power Trim and Tilt |
| Engine Type | 4-Stroke |
| Max Output | 130 hp (96 kW) @ 5500 RPM |
| Recommended Fuel | Unleaded Gasoline (86 Octane) |
| Shaft Length | 20 in (508 mm) |
| Engine Oil Capacity | 4.0 L |
| Oil Capacity | 4.0 L |
Safety precautions and procedures for PGM-FI system troubleshooting.
Diagnostic steps and DTC analysis for PGM-FI system issues.
Diagnosing Manifold Absolute Pressure sensor faults and DTCs.
To Next Page
