Need help?Do you have a question about the Honda 1979 ATC110 and is the answer not in the manual?
General| Brand | Honda |
|---|---|
| Model | 1979 ATC110 |
| Category | Offroad Vehicle |
| Language | English |
Identifies and labels key components of the ATC110.
Explains how to find and record frame and engine serial numbers.
Explains the operation of various controls and indicators on the ATC110.
Explains the operation and positions of the three-way fuel valve.
Details on fuel tank capacity, type of gasoline, and vent lever operation.
Step-by-step guide to checking the engine oil level using the dipstick.
Specifies the recommended oil grade and viscosity for the ATC110.
Detailed instructions for draining and refilling the engine oil.
Daily checks to ensure safe operation and prevent damage.
Step-by-step procedure for starting the ATC110 engine.
Recommended break-in procedure for new ATC110 engines.
Techniques for safely turning the ATC110, emphasizing weight shift.
Explains techniques for handling skids and the factors affecting them.
Riding technique for safely ascending slopes.
Guidance on safely riding down slopes, including sand dunes.
How to ride across slopes while maintaining balance.
Precautions and techniques for riding the ATC through water.
Adjustments and considerations for operating the ATC at high altitudes.
Proper procedure for parking and securing the ATC110.
Maintenance tasks for the first week of operation.
Maintenance tasks to be performed every 30 operating days or 3 months.
Lists the tools included in the ATC110's onboard tool kit.
Instructions for cleaning the fuel strainer to ensure proper fuel flow.
Explains carburetor adjustment for idle speed and fuel mixture.
Details on modifying the carburetor for high altitude operation and returning to standard.
Guide to inspecting, gapping, and replacing the spark plug.
Instructions for cleaning and maintaining the air cleaner element.
Procedure for checking and adjusting valve clearance.
How to inspect, clean, and adjust the contact breaker points.
Steps to set the ignition timing after adjusting the contact breaker points.
Instructions for adjusting the clutch for proper operation.
How to adjust the free play of the brake pedal.
How to adjust the free play of the brake lever and parking brake.
How to inspect and adjust the throttle cable free play.
Procedure for checking and adjusting drive chain tension and lubrication.
Instructions for adjusting the cam chain tension for optimal engine performance.
How to periodically purge the spark arrester of carbon buildup.
Steps for preparing the ATC110 for storage to prevent damage.
Procedures for preparing the ATC110 for transport, including fuel draining.
Step-by-step guide for removing the rear wheel.
Step-by-step guide for removing the front wheel.
To Next Page