Need help?Do you have a question about the Honda 1989 Elite CH250 and is the answer not in the manual?
General| Displacement | 244 cc |
|---|---|
| Cooling System | Liquid-cooled |
| Bore x Stroke | 72.0 mm x 60.0 mm |
| Compression Ratio | 10.0:1 |
| Fuel System | Carburetor |
| Ignition | CDI |
| Starter | Electric |
| Transmission | Automatic |
| Final Drive | Belt |
| Front Suspension | Telescopic fork |
| Front Brake | Disc |
| Rear Brake | Drum |
| Front Tire | 110/90-12 |
| Rear Tire | 120/90-10 |
| Width | 715 mm |
| Engine Type | Single-cylinder, four-stroke |
| Fuel Capacity | 10.0 L |
Safety precautions for operating the motorcycle and handling hazardous materials.
Comprehensive technical data including dimensions, frame, engine, and electrical specifications.
Specific torque values for fasteners and components during assembly/disassembly.
Procedures for removing and installing various body panels like front covers and inner fenders.
Procedures for removing and installing the exhaust system.
Recommended maintenance intervals and tasks based on mileage.
Checking valve clearance and adjusting carburetor idle speed.
Procedures for oil pump removal, installation, disassembly, and assembly.
Detailed procedures for removing and installing the engine.
Removal, installation, disassembly, and assembly of the cylinder head.
Steps for removing and installing the cylinder and piston assembly.
Procedures for separating and assembling the crankcase.
Removal, installation, disassembly, and assembly of pulleys and clutch.
Procedures for front and rear brake disassembly and assembly.
General safety, notes, and common problems for starter system.
Comprehensive wiring diagram for the motorcycle's electrical system.
Troubleshooting for engine not starting or hard starting conditions.
To Next Page
