Need help?Do you have a question about the Honda 2000-VTR1000 SP1 and is the answer not in the manual?
General| Displacement | 999cc |
|---|---|
| Compression Ratio | 10.8:1 |
| Fuel System | PGM-FI fuel injection |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 190/50 ZR17 |
| Engine Type | V-twin, 4-stroke |
| Bore x Stroke | 98 mm x 66 mm |
| Ignition | Computer-controlled digital with electronic advance |
| Front Suspension | 43 mm inverted telescopic fork, adjustable preload, compression and rebound damping |
| Rear Suspension | Pro-Link single shock, adjustable preload, compression and rebound damping |
| Front Brakes | Dual 320 mm discs with 4-piston calipers |
| Rear Brakes | Single 220 mm disc |
| Width | 725 mm |
| Fuel Capacity | 18 L (4.8 US gal) |
Covers starting the engine, break-in procedures, and safe operation.
Lists key technical specifications for the motorcycle components.
Details essential torque specifications for various fasteners and components.
Presents the complete electrical system wiring schematic.
Outlines routine maintenance intervals and pre-ride checks.
Explains how to check and adjust valve clearance.
Provides the procedure for changing engine oil and oil filter.
Details inspection and service for the cooling system components.
Explains service for brake calipers, pads, fluid, and master cylinders.
Details fork inspection, adjustment, and service.
Covers rear shock absorber and swingarm service.
Covers the removal and installation of the oil pump.
Provides troubleshooting steps for common fuel system issues.
Details troubleshooting for the Programmed Fuel Injection system.
Covers inspection, removal, and installation of the fuel tank and pump.
Covers radiator inspection, pressure testing, and removal.
Explains water pump inspection, disassembly, and assembly.
Details the steps for removing and installing the engine.
Specifies the correct tightening sequence for engine hanger bolts.
Explains the steps for removing the cylinder head assembly.
Covers inspection and refacing procedures for valve seats.
Covers the disassembly and assembly of the transmission gears.
Details the procedure for replacing front and rear brake pads.
To Next Page