How to fix poor performance at low and idle speeds on a Honda CR125R 2006 Motorcycle?
To address poor performance at low and idle speeds on your Honda Motorcycle, consider these steps: Check ignition timing. Check carburetor air screw adjustment. Inspect for air leaks past the manifold. Try a spark test. Check the throttle position sensor. Check the RC valve system.
What to do if fuel flow is restricted in Honda Motorcycle?
If the fuel flow is restricted in your Honda Motorcycle, disconnect the fuel line at the carburetor and check for clogging.
General| Displacement | 124.8cc |
|---|---|
| Bore x Stroke | 54.0mm x 54.5mm |
| Ignition | CDI |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Tire | 80/100-21 |
| Rear Tire | 100/90-19 |
| Fuel Capacity | 2.1 gallons |
| Engine Type | Single-cylinder, two-stroke |
| Front Suspension | 12.4-inch travel |
| Rear Suspension | Pro-Link Showa single shock |
| Front Brake | Single 240mm disc |
| Rear Brake | Single disc |
| Carburetion | 38mm Keihin PWK carburetor |
| Seat Height | 955 mm |
Crucial safety precautions for riding.
Risks of non-Honda parts.
Importance of reading safety labels.
Labeled diagram of controls.
Rider and bike readiness.
Safety during operation.
Required servicing intervals.
Detailed maintenance for systems.
Cleaning and polishing.
Tuning front suspension.
Tuning rear suspension.
Carburetor tuning.
Tuning based on track conditions.
Key motorcycle data.
Fastener torque values.
How to obtain service manuals.
Contact and dealer support channels.
Summary of key operational information.
To Next Page