Do you have a question about the Honda CR250R 2006 and is the answer not in the manual?
Provides crucial safety recommendations and information for riding your CR safely.
Details essential precautions for rider safety, covering gear, knowledge, limits, and condition.
Details essential pre-ride checks to ensure the motorcycle is in safe operating condition.
Lists critical items to inspect before each ride for safety and performance.
Outlines crucial safety precautions to follow during maintenance tasks.
Details regular inspection and service intervals based on races or riding hours.
Provides general maintenance tips for competition use, including tightening procedures.
Gives advice on checks and adjustments between motos and after competition.
Explains how to adjust front suspension for rider weight, riding conditions, air pressure, and damping.
Details how to adjust rear suspension for rider weight, conditions, and spring pre-load.
Covers carburetor adjustments for altitude, temperature, and specific racing conditions.
Offers a guide to diagnosing and resolving poor performance issues at low/idle and high speeds.
Provides torque values for various nuts, bolts, and fasteners for proper assembly.
| Displacement | 249 cc |
|---|---|
| Bore x Stroke | 66.4 mm x 72.0 mm |
| Ignition | CDI |
| Transmission | 5-speed |
| Final Drive | Chain |
| Rear Brake | Single 240 mm disc |
| Front Tire | 80/100-21 |
| Rear Tire | 110/90-19 |
| Wheelbase | 58.3 inches |
| Engine Type | Single-cylinder, two-stroke |
| Carburetion | 38mm Keihin PWK carburetor |
| Front Suspension | Showa 47 mm inverted fork |
| Rear Suspension | Pro-Link Showa single shock |
| Front Brake | Single 240mm disc |
| Dry Weight | 214 pounds |











