Need help?Do you have a question about the Honda CRF250X 2006 and is the answer not in the manual?
General| Engine Type | Liquid-cooled single-cylinder four-stroke |
|---|---|
| Displacement | 249 cc |
| Valve Train | Unicam, four-valve |
| Induction | Keihin 37 mm flat-slide carburetor |
| Transmission | 5-speed |
| Front Brake | Single 240 mm disc with twin-piston caliper |
| Rear Brake | Single 240 mm disc |
| Front Tire | 80/100-21 |
| Rear Tire | 100/100-18 |
| Wheelbase | 58.3 inches |
| Ground Clearance | 13.6 inches |
| Bore x Stroke | 78.0mm x 52.2mm |
| Final Drive | Chain |
| Front Suspension | 47 mm inverted Showa cartridge fork with 16-position rebound damping adjustability; 12.4 inches travel |
| Rear Suspension | Pro-Link Showa single shock with spring preload, 17-position rebound damping adjustability, and compression damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns); 12.4 inches travel |
Key recommendations for rider safety: wear helmet, protective gear, ride off-road only, and keep bike maintained.
Highlights the importance of inspecting the motorcycle before each ride for safety and performance.
Lists critical items to check before riding, emphasizing correction of any issues to prevent crashes.
Provides procedures for starting and stopping the engine under various conditions (cold, hot, flooded).
Details how to apply front and rear brakes smoothly for safe stopping and control.
Outlines regular inspection and service intervals for maintaining safety and reliability.
Recommends specific engine oils and explains how to check and change the oil.
Stresses the importance of air cleaner maintenance for engine performance and longevity.
Explains how to check and adjust valve clearance to prevent engine damage and power loss.
Details brake system inspection, fluid levels, lever/pedal adjustments, and pad wear.
Provides information on tire pressure, inspection, and replacement to ensure safe operation.
Guides the user through adjusting front suspension for rider weight and track conditions.
Explains how to adjust rear suspension spring pre-load and damping for optimal performance.
Lists essential torque values for tightening nuts, bolts, and fasteners for safety and proper assembly.
To Next Page