＋
−
Spark Plug Gap:
Install the spark plug cap.
Repeat this procedure for the
other three spark plugs.
Torque the spark plug. (If you do
not have a torque wrench, tighten
the spark plug two-thirds of a turn
after it contacts the cylinder head.)
Tightening torque:
Put the new spark plug into the
socket; then screw it into the hole.
Screw it in by hand so you do not
crossthread it.
5.
6.
7.
NGK:
DENSO:
4.
Specifications:
Spark Plugs (4-cylinder Models)
Maintenance
252
0.04 in (1.1 mm)13 lbf·ft (18 N·m , 1.8 kgf·m)
PZFR5F-11
PKJ16CR-L11
0
0.1 mm
Tighten the spark plugs caref ully. A
spark plug that is too loose can
overheat and damage the engine.
Overtightening can cause damage to
the threads in the cylinder head.
To Next Page
Loading...
Need help?
General
