To signal a lane change, push lightly
on the turn signal lever in the proper
direction and hold it. The lever will
return to the center position as soon
as you release it.
Signal a turn or lane change with this
lever. Push down on the lever to
signal a left turn, and up to signal a
right turn. If you push it up or down
all the way, the turn signal continues
to blink even when you release the
lever. It shuts off automatically as
you complete the turn.
Turntheknobontheleftsideofthe
instrument panel to adjust the
brightness of the instrument panel
lights.
Turn SignalsInstrument Panel Brightness
Controls Near the Steering Wheel
Instruments and Controls
69
TTUURRNN SSIIGGNNAALL LLEEVVEERRKKNNOOBB
To Next Page
Loading...
Need help?
General
