Slide the new wiper blade into the
holder until the tabs lock.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Lower the wiper arm.
Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull up firmly until the tabs
come out of the holder.
3. 4.
5.
6.
7.
Front only:
Wiper Blades
262
REINFORCEMENT
BLADE BLADE
０７／０５／０９ １１：４８：４９ ３１Ｓ９Ｖ６５０ ０２６７
To Next Page
Loading...
Need help?
General
