If the impact is on the passenger’s
side, the passenger’s side curtain
airbag will inflate even if there are no
occupants on that side of the vehicle.
When you turn the ignition switch to
the ON (II) position, this indicator
comes on briefly then goes off. This
tells you the system is working
properly.
In a moderate to severe side impact,
sensors will detect rapid acceleration
and signal the control unit to
instantly inflate the side curtain
airbag and activate the seat belt
tensioner on the driver’s or the
passenger’s side of the vehicle.
The SRS indicator alerts
you to a potential problem
with your airbags or seat belt
tensioners (see page ).
The airbag on the passenger’s side
will deploy, and the seat belt
tensioner will activate, even if there
are no passengers on that side of the
vehicle.
To get the best protection from the
side curtain airbags, occupants
should wear their seat belts and sit
upright and well back in their seats.
If the rollover sensor detects your
vehicle is about to roll over, it signals
the control unit, which immediately
deploys both side curtain airbags and
activates both front seat belt
tensioners.
23
CONTINUED
How Your Side Curtain Airbags
Work
How the SRS Indicator Works
In a Side Impact
In a Rollover
Additional Information About Your Airbags
Driver and Passenger Safety
33
SIDE CURTAIN AIRBAG
０７／０５／０９ １１：１６：５５ ３１Ｓ９Ｖ６５０ ００３８
To Next Page
Loading...
Need help?
General
