−
−
＋−
You can use the instrument panel
brightness control dial to adjust the
illumination of the audio system (see
page ). The audio system
illuminates when the parking lights
are on, even if the radio is off.
These modes adjust
the strength of the sound coming
from each speaker. Left/Right
balance adjusts the side-to-side
strength, while Front/Rear fader
adjusts the front-to-back strength.
To adjust the left/right balance,
touch the ‘‘L’’ or ‘‘R’’ icon. To adjust
the front/rear fader, touch the ‘‘FR’’
or ‘‘RR’’ icon.
To see the audio display when you
are finished adjusting the sound,
wait 5 seconds.To adjust the sound, push the
AUDIO button, then enter the sound
grid by touching the SOUND icon on
the display.
To adjust the treble
and bass, touch or on each side
of the treble or bass adjustment bar.
The adjustment bar shows you the
current setting.
76
Playing the Radio
Audio System Lighting
Lef t/Right Balance and Front/
Rear Fader
Treble/Bass
Adjusting the Sound
Features
121
AUDIO BUTTON
０７／０５／０９ １１：２９：３１ ３１Ｓ９Ｖ６５０ ０１２６
To Next Page
Loading...
Need help?
General
