Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
4.
5.
6.
7.
91
Installing a Child Seat
48
TETHER STRAP HOOK
ANCHOR
Flexible-type
０７／０５／０９ １１：１９：０１ ３１Ｓ９Ｖ６５０ ００５３
To Next Page
Loading...
Need help?
General
