If a brake light does not work, the
indicator comes on
when you push the brake pedal with
the ignition switch in the ON (II)
position.
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If an indicator does not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see pages and ).
Replace the bulb as soon as possible,
since other drivers cannot see that
you are signaling.
The appropriate indicator comes on
in this display if the tailgate or any
door is not closed tightly.
All of the indicators in the monitor
display come on for a few seconds
when you turn the ignition switch to
the ON (II) position.
When you press the hazard warning
button, both turn signal indicators
and all turn signals on the outside of
the vehicle flash.
A burned out brake light is a hazard
when drivers behind you cannot tell
you are braking. Replace the bulb as
soon as possible (see page ).
255 258
258
Turn Signal and
Hazard Warning
Indicators
Brake Lamp Indicator Door and Tailgate Open Monitor
Instrument Panel Indicators
66
BRAKE LAMP
０７／０５／０９ １１：２１：３８ ３１Ｓ９Ｖ６５０ ００７１
To Next Page
Loading...
Need help?
General
