This system uses the same sensors
as the front airbags to monitor
whether the front seat belts are
latched or unlatched, and how much
weight is on the front passenger’s
seat (see pages and ).
If the indicator comes on or the
beeper sounds when the driver’s seat
belt is latched and there is no front
seat passenger and no items on the
front seat, something may be
interfering with the monitoring
system. Look for and remove:
Any object(s) hanging on the seat
or in the seat-back pocket.
Any objects, such as a folded-down
back seat, that are touching the
rear of the seat-back.
Any items under the front
passenger’s seat.
If no obstructions are found, have
your vehicle checked by a dealer.
Your seat belt system includes lap/
shoulder belts in all eight seating
positions. The front seat belts are
also equipped with automatic seat
belt tensioners.
This system monitors the front seat
belts. If you turn the ignition switch
to the ON (II) position before your
seat belt is fastened, the beeper will
sound and the indicator will flash. If
your seat belt is not fastened before
the beeper stops, the indicator will
stop flashing but remain on.
The seat belt system
includes an indicator on the
instrument panel and a beeper to
remind you and your passengers to
fasten your seat belts.
If a front passenger does not fasten
their seat belt, the indicator will
come on about 6 seconds after the
ignition switch is turned to the ON
(II) position.
If either the driver or a front
passenger does not fasten their seat
belt while driving, the beeper will
sound and the indicator will flash
again at regular intervals.
When no one is sitting in the front
passenger’s seat, or a child or small
adult is riding there, the indicator
should not come on and the beeper
should not sound.
3130
Seat Belt System Components
Seat Belt Reminder
Additional Information About Your Seat Belts
Driver and Passenger Safety
21
０７／０５／０９ １１：１５：２０ ３１Ｓ９Ｖ６５０ ００２６
To Next Page
Loading...
Need help?
General
