Digital Clock
The digital clock displays the time
with the ignition switch in any
position.
To set the clock:
1. Press and hold the H button until
the hour advances to the desired
hour.
2. Press and hold the M button until
the numbers advance to the
desired minutes.
You can use R to quickly set the time
to the nearest hour. If the displayed
time is before the half hour, pressing
R sets the clock back to the previous
hour. If the displayed time is after
the half hour, pressing R sets the
clock forward to the beginning of the
next hour.
For example:
1:06 would RESET to 1:00.
1:52 would RESET to 2:00.
Instruments and Controls
H
M
R
To Next Page
Loading...
Need help?
General
