20221109171351_32K2LA000_eng_BOOK Page 42 Wednesday, November 09 2022 17:20:28 JST
Operation Guide
39
If it comes on while engine is running: (P.113)
Comes on briefly when the ignition switch is turned to the (On) position, regardless of
engine stop switch position.
PGM-FI (Programmed Fuel Injection) malfunction indicator lamp (MIL)
If it comes on while riding: (P.111)
Comes on briefly when the ignition switch is turned to the (On) position.
High coolant temperature indicator
Torque Control indicator
• Comes on when the ignition switch is turned to the (On) position. Goes off when your
speed reaches approximately 3 km/h (2 mph) to indicate Torque Control is ready to work.
If it comes on while riding: (P.115)
• Blinks when Torque Control is operating.
Torque Control OFF indicator
Comes on when the Torque Control is turned to off.
Right turn signal indicator
To Next Page
Loading...
