Honda selectable torque control
Torque Control level (engine power control)
can be selected or turned on/off.
u Do not operate the Torque Control switch
while riding.
Stop the vehicle first, turn the Torque
Control off or on and select the desired
level.
u The Torque Control setting cannot be
changed or turned off when the system is
activated (Torque Control indicator flashing).
u In the following cases, the Torque Control
will be turned on and the specific Torque
Control level will automatically be set as
below.
•
Each time the ignition switch is turned
to the (On) position or the Torque
Control is turned on: Level 2
Torque Control level setting
The level can be selected by pressing the
Torque Control switch.
u Level 2: the maximum Torque Control level
u Level 1: the minimum Torque Control level
Torque Control on and off
Torque Control can be turned on and off by
pressing and holding the Torque Control
switch.
20221109171351_32K2LA000_eng_BOOK Page 62 Wednesday, November 09 2022 17:20:28 JST
Operation Guide
59
Continued
Torque Control switch
To Next Page
Loading...
