What to do if the starter motor operates but the Honda Motorcycle engine does not start?
If the starter motor operates but the Honda Motorcycle engine doesn't start: * Check the correct engine starting procedure. * Ensure there is gasoline in the fuel tank. * Check if the PGM-FI malfunction indicator lamp (MIL) is on. * Check for a loose battery connection. * Check the condition of the battery.
What to do if the Honda Africa Twin 2021 Motorcycle engine overheats?
If your Honda Motorcycle engine is overheating: * Verify that the radiator fan is working. * Allow the engine to cool down with the ignition switch off. * Check the radiator hose for leaks. * Check the coolant level in the reserve. If these checks are normal, you may continue riding, but closely monitor the engine. If the engine continues to overheat, stop it using the ignition switch, and then turn the ignition switch to the ON position.
General| Displacement | 1084cc |
|---|---|
| Bore x Stroke | 92.0 mm x 81.5 mm |
| Compression Ratio | 10.1:1 |
| Fuel System | PGM-FI electronic fuel injection |
| Front Tire | 90/90-21 |
| Rear Tire | 150/70-18 |
| Engine Type | Liquid-cooled parallel twin |
| Max Power Output | 75 kW (101 hp) @ 7, 500 rpm |
| Max Torque | 105 Nm @ 6, 000 rpm |
| Transmission | 6-speed |
| Fuel Tank Capacity | 24.8 liters |
| Seat Height | 850 mm |
| Front Suspension | Showa 45 mm cartridge-type inverted telescopic fork with preload, compression and rebound damping adjustment |
| Rear Suspension | Pro-Link with Showa monoshock, adjustable preload and rebound damping |
| Front Brake | Dual 310mm disc with radial fit 4-piston calipers and sintered metal pads |
| Rear Brake | 256mm single disc with single piston caliper |
| Wheelbase | 1, 575 mm |
| Instruments | 6.5-inch TFT touchscreen multi-information display |
| ABS | Standard |
| Traction Control | Honda Selectable Torque Control (HSTC) |
| Curb Weight | 226 kg (498 lbs) - Manual / 236 kg (520 lbs) - DCT |
Introduction to the vehicle and Honda ownership.
General safety advice and importance of safe operation.
Specific guidelines to enhance rider safety and procedures.
Explanation of safety and information labels on the vehicle.
Essential precautions for safe riding and protective apparel.
Guidelines for break-in period and safe braking procedures.
Advice on using approved accessories and avoiding unsafe modifications.
Tips for riding safely in off-road conditions and obeying laws.
Guidelines for safely carrying luggage and its effect on handling.
Identification of key motorcycle components and their locations.
Explanation of the instrument panel displays and indicators.
Location and function of handlebar switches for vehicle operation.
Procedure for starting the engine and troubleshooting starting issues.
Explanation of gear shifting patterns, points, and modes.
How to set, fine-tune, and temporarily disengage cruise control.
Explanation of the cornering light function and its operating conditions.
Procedures for opening and closing the fuel fill cap and fuel guidelines.
Information on the accessory socket's location, capacity, and usage.
Details on connecting USB devices to the vehicle's USB socket.
Location and use of helmet holder, helmet set wire, and document bag.
Essential reasons for vehicle maintenance and safety warnings.
Recommended maintenance intervals and service requirements.
Guidelines for pre-ride inspections, periodic checks, and part replacement.
List of tools provided with the vehicle and their locations.
Procedures for removing and installing various body components like seats and skid plates.
Instructions for cleaning the spark arrester to ensure proper function.
Procedures for checking and adding engine oil, and selecting the correct oil.
How to check and add coolant, and important warnings about hot coolant.
Procedures for checking brake fluid, pads, and parking brake.
Checking the side stand operation and its safety function.
Inspecting drive chain slack, sprockets, and cleaning/lubricating the chain.
Inspecting wheel rims and spokes for damage and spoke tension.
Checking and adjusting clutch lever freeplay for smooth operation.
Checking the throttle operation for smooth movement.
Adjusting brake lever, front/rear suspension, and windscreen height.
Diagnosing and resolving issues when the engine fails to start.
Identifying and addressing engine overheating issues indicated by the gauge.
Explains various warning indicators like low oil pressure and PGM-FI MIL.
Troubleshooting blinking gear indicators, especially in Dual Clutch Transmission models.
Explains indications like fuel gauge failure and other system warnings.
Procedures and warnings for emergency tire repair and proper replacement.
Common issues with Bluetooth pairing, connection, and audio playback.
Common electrical problems like dead battery, burnt bulbs, and blown fuses.
Information on vehicle data recording for diagnostics and maintenance.
Details about ignition keys, key tag, and making duplicate keys.
Overview of ignition switch, engine stop switch, odometer, and tripmeters.
Guidelines for washing, cleaning components, and protecting the vehicle.
Procedures for preparing the vehicle for extended storage.
Safe methods for transporting the vehicle and related warnings.
Advice on choosing eco-friendly cleaners and recycling wastes.
Location and importance of VIN and engine serial numbers.
Explanation of exhaust and noise emission requirements and systems.
Information about the catalytic converter and its maintenance.
Guidance on using oxygenated fuels and potential issues.
Information on obtaining service and owner's manuals.
Overview of warranty coverage, responsibilities, and service recommendations.
Contact information for American Honda Motor Co. and Honda Canada Inc.
Key specifications like dimensions, weight, engine, and fuel capacity.
Field to record Vehicle Identification Number.
Field to record Engine Number.
Warning about chemical exposure from vehicle operation and maintenance.
To Next Page