Adjusting the Rear Suspension
#
Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Use the pin spanner and the extension bar to
turn the adjuster. Turn the position 2 to 5
increase spring preload (hard). The standard
position is 1.
NOTICE
Attempting to adjust directly from 1 to 5 or 5 to 1
may damage the shock absorber.
NOTICE
Do not turn the adjuster beyond its limits.
20190110110614_32K29B300_eng_BOOK Page 87 Thursday, January 10 2019 11:10:25 JST
Other Adjustments u Adjusting the Rear Suspension
Maintenance
84
Pin spanner Extension bar
1 234 5
To Next Page
Loading...
Need help?
General