EasyManua.ls Logo

Honda BF250D User Manual

Honda BF250D
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Thank you for purchasing a Honda
Outboard Motor.
This manual covers operation and
maintenance of the Honda BF200D/
BF225D/BF250D Outboard Motor.
All information in this publication is
based on the latest product
information available at the time of
approval for printing.
Honda Motor Co., Ltd. reserves the
right to make changes at any time
without notice and without incurring
any obligation.
No part of this publication may be
reproduced without written
permission.
This manual should be considered a
permanent part of the Outboard
Motor and should remain with it if it
is resold.
Throughout this manual, you will see
safety messages proceeded by the
following words and symbols. Here’s
what they mean:
Indicates that equipment or
property damage could result if
instructions are not followed.
Gives helpful information.
If a problem should arise, or if you
have any questions about the
Outboard Motor, consult an
authorized Honda Outboard Motor
dealer.
Honda Motor Co., Ltd. 2018, All
Rights Reserved
DANGER
Indicates serious injury or death
WILL result if instructions are
not followed.
WARNING
Indicates a strong possibility that
serious personal injury or death
may result if instructions are not
followed.
CAUTION
Indicates a possibility that
personal injury or equipment
damage could result if
instructions are not followed.
WARNING
Honda Outboard Motors are
designed to give safe and
dependable service if operated
according to instructions. Read
and understand the Owners
Manual before operating the
Outboard Motor. Failure to do so
could result in personal injury or
equipment damage.
42ZVL600.book 1 ページ 2018年7月19日 木曜日 午前9時6分

Table of Contents

Other manuals for Honda BF250D

Questions and Answers:

Honda BF250D Specifications

General IconGeneral
BrandHonda
ModelBF250D
CategoryOutboard Motor
LanguageEnglish

Summary

Safety Information

Operator Responsibility

Highlights the owner's role in safe operation, emphasizing reading the manual and following instructions.

Safe Operation Practices

Details crucial safety precautions for operating the outboard motor, including fuel handling and emergency procedures.

Carbon Monoxide Poisoning Hazard

Alerts to the danger of carbon monoxide gas from exhaust, requiring adequate ventilation.

Controls and Features

Remote Control Lever Operation

Explains how to operate remote control levers (D1, D2, R1, R2, R3 types) for shifting and speed control.

Emergency Stop Switch

Explains the function and use of the emergency stop switch and its lanyard for immediate engine shutdown.

Installation

Outboard Motor Installation Procedure

Details the steps for securely mounting the outboard motor, including sealant and torque specifications.

Pre-Operation Checks

Engine Oil Inspection and Refilling

Explains how to check and refill engine oil, emphasizing the importance of proper oil type and level.

Starting the Engine

Engine Start Procedure (D1, D2 Types)

Details the steps for starting the engine using the remote control lever and emergency stop switch.

Engine Start Procedure (R1, R2, R3 Types)

Details starting procedures for R1, R2, R3 types, including emergency stop switch and control lever.

Operation

Break-in Procedure

Outlines the 10-hour break-in period, specifying engine speeds and operating times.

Gear Shifting Procedures

Details gear shifting operations for various remote control lever types (D1, D2, R1, R2, R3).

Engine Protection Systems

Explains the engine protection systems for oil pressure, overheat, PGM-FI, and ACG warnings.

Over-rev Limiter and Power Reduction

Describes the over-rev limiter and power reduction systems that protect the engine.

Stopping the Engine

Emergency Engine Stop

Explains how to stop the engine immediately using the emergency stop switch.

Normal Engine Stop Procedures

Details normal engine shutdown procedures using the start/stop switch or engine switch.

Maintenance

Maintenance Schedule Overview

Presents a detailed schedule for regular service intervals based on time or operating hours.

Engine Oil Replacement Procedure

Provides step-by-step instructions for draining, refilling, and checking engine oil levels.

Spark Plug Check, Cleaning, and Replacement

Details the procedure for inspecting, cleaning, and replacing spark plugs for optimal engine operation.

Fuel Filter with Water Separator Maintenance

Covers inspection, cleaning, and replacement intervals for the fuel filter with water separator.

Submerged Outboard Motor Procedure

Outlines the immediate steps to take if the outboard motor becomes submerged to minimize corrosion.

Troubleshooting

Warning System Troubleshooting

Lists common symptoms related to warning systems and their possible causes and remedies.

PGM-FI and ACG Warning Troubleshooting

Addresses troubleshooting for PGM-FI and ACG warning systems, including battery voltage and ACG faults.

Emergency Gear Shifting (DBW Type)

Provides manual shifting procedures for DBW type systems if gear cannot be shifted normally.

Related product manuals