GENERAL INFORMATION
1-8
FRONT WHEEL/SUSPENSION/STEERING SPECIFICATIONS
Unit: mm (in)
REAR WHEEL/BRAKE/SUSPENSION SPECIFICATIONS
Unit: mm (in)
HYDRAULIC BRAKE SPECIFICATIONS
Unit: mm (in)
ITEM STANDARD SERVICE LIMIT
Minimum tire thread depth – 1.5 (0.06)
Cold tire
pressure
Driver only 175 kPa (1.75 kgf/cm
2
, 25 psi) –
Driver and passenger 175 kPa (1.75 kgf/cm
2
, 25 psi) –
Axle runout – 0.2 (0.01)
Wheel rim
runout
Radial – 1.0 (0.04)
Axial – 1.0 (0.04)
Wheel hub-to-rim distance 8.8 ± 1 (0.35 ± 0.04) –
Fork Spring free length 468.5 (18.45) 458 (18.0)
Pipe runout – 0.20 (0.008)
Recommended fluid Fork fluid –
Fluid level 165 (6.50) –
Fluid capacity 150 ± 1.0 cm
3
(5.06 ± 0.03 US oz, 5.26 ±
0.04 lmp oz)
–
Steering head bearing pre-load 0.7 – 1.3 kgf (1.64 – 2.81 lbf) –
ITEM STANDARD SERVICE LIMIT
Minimum tire thread depth – 2.0 (0.08)
Cold tire pressure Driver only 225 kPa (2.25 kgf/cm
2
, 33 psi) –
Driver and passenger 280 kPa (2.80 kgf/cm
2
, 41 psi) –
Axle runout – 0.2 (0.01)
Wheel rim runout Radial – 1.0 (0.04)
Axial – 1.0 (0.04)
Wheel hub-to-rim distance 3 ± 1 (0.12 ± 0.04) –
Drive chain Size/link 428/126 –
Slack 20 – 30 (0.8 – 1.2) –
Brake Pedal free play 20 – 30 (0.8 – 1.2) –
Drum I.D. 130.0 – 130.2 (5.12 – 5.13) 131.0 (5.16)
ITEM STANDARD SERVICE LIMIT
Specified brake fluid DOT 3 or DOT 4 –
Brake disc thickness 3.8 – 4.2 (0.15 – 0.17) 3.5 (0.14)
Brake disc runout – 0.10 (0.004)
Master cylinder I.D. 12.000 – 12.043 (0.4724 – 0.4741) 12.055 (0.4746)
Master piston O.D. 11.957 – 11.984 (0.4707 – 0.4718) 11.945 (0.4703)
Caliper cylinder I.D. 26.000 – 26.050 (1.0236 – 1.0256) 26.060 (1.0260)
Caliper piston O.D. 25.918 – 25.968 (1.0204 – 1.0224) 25.91 (1.020)
To Next Page