Need help?Do you have a question about the Honda CBR1100XX series and is the answer not in the manual?
General| Transmission | 6-speed |
|---|---|
| Bore x Stroke | 79 mm x 58 mm |
| Compression Ratio | 11.0:1 |
| Fuel System | PGM-FI electronic fuel injection |
| Rake (Caster Angle) | 25° |
| Front Suspension | 43mm inverted telescopic fork |
| Rear Suspension | Pro-Link single shock |
| Front Brakes | Dual 310 mm discs with three-piston calipers |
| Rear Brakes | Single 256 mm disc with three-piston caliper |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 180/55 ZR17 |
| Ignition | Computer-controlled digital with electronic advance |
| Valve Train | DOHC, 4 valves per cylinder |
| Induction | Ram Air |
| Final Drive | Chain |
| Front Suspension Adjustability | Spring preload, rebound damping |
| Rear Suspension Adjustability | Spring preload, rebound damping |
Explains safety labels and messages with alert symbols and signal words like DANGER, WARNING, CAUTION.
Motorcycle safety, protective apparel, and guidelines for carrying loads and weight limits.
Identification and function of indicators like neutral, oil pressure, turn signals, and PGM-FI.
Operation of MODE, SET buttons, and multi-function display features like clock and trip meter.
Displays coolant temperature digitally and describes overheating indications.
Information on adjusting the rear suspension rebound damping for ride comfort.
Checking front and rear brake fluid levels and adjusting the front brake lever.
Checking clutch fluid level and adjusting the clutch lever.
Recommends coolant type and how to check the reserve tank level.
How to open/close the fuel fill cap, capacity, and advice on petrol with alcohol.
Checking engine oil level, quality, filter changes, and disposal.
Importance of proper tire inflation and inspecting treads/sidewalls for wear and damage.
Minimum tread depth limits and guidelines for tire repair/replacement.
Lists recommended tire sizes and brands for the motorcycle.
Explains ignition switch positions and details about the motorcycle keys.
Operation of engine stop, headlight, and starter buttons on the right handlebar.
Operation of headlight dimmer, passing light, turn signal, and horn buttons.
How to lock and unlock the steering using the ignition key.
Location of helmet holder and procedure for accessing the seat.
Details on the document bag and storage for U-shaped anti-theft lock.
Procedures for removing rear cowl, lower cowls, upper cowl covers, and wind guards.
Procedure for removing the inner panels.
Steps for preparing and starting the engine, including flooded engine and ignition cut-off.
Importance of regular maintenance, safety precautions, and the maintenance schedule.
Guide to selecting engine oil grade based on atmospheric temperature.
How to inspect drive chain slack, condition, and perform adjustments.
Step-by-step guide for removing and installing the front wheel.
Important notes for proper installation of the rear wheel.
How to inspect front and rear brake pads for wear using cutouts.
How to inspect the overall brake system functionality.
Step-by-step procedure for removing the motorcycle battery.
Location of fuse box and procedure for replacing fuses.
How to adjust the stoplight switch operation.
Procedures for replacing headlight, position, stop/taillight, and turn signal bulbs.
Recommended steps for washing the motorcycle safely.
Steps to prepare the motorcycle for extended storage.
Steps to take the motorcycle out of storage and prepare for riding.
To Next Page