88
uuIndicatorsu
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:Canadian models only: Apply and hold the brake pedal before turning the ignition on.
*3:Canadian models without smart entry system
*4:Canadian models with smart entry system
Indicator Name On/Blinking Explanation Message
Immobilizer
System Indicator
• Blinks if the immobilizer system
cannot recognize the key
information.
• Blinks - You cannot start the engine.
Turn the ignition switch to LOCK (0
*1
,
pull the key out
*2
, and then insert the key
and turn it to ON (w
*1
again.
• Repeatedly blinks - The system may be
malfunctioning. Have your vehicle
checked by a dealer.
• Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.
21 CIVIC 4D HCM_HMIN_J (KA KL KC)-31TBA6500.book 88 ページ 2020年8月25日 火曜日 午後2時6分