96
uuIndicatorsuDriver Information Interface Warning and Information Messages
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Message Condition Explanation
●
Appears when the engine coolant temperature gets
abnormally high.
2 Overheating P. 587
●
Appears when you turn the ignition switch to ON
(w
*1
without fastening the driver’s seat belt.
●
Fasten the seat belt properly before you start to drive.
●
Appears if the automatic brake hold is automatically
canceled while it is in operation.
●
Immediately depress the brake pedal.
●
Appears when the automatic brake hold system is
turned off.
2 Automatic Brake Hold P. 497
●
Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
●
Fasten the driver’s seat belt.
2 Automatic Brake Hold P. 497
21 CIVIC 4D HCM_HMIN_J (KA KL KC)-31TBA6500.book 96 ページ ２０２０年８月２５日 火曜日 午後２時６分
To Next Page