4 of 11 AII (2106) © 2021 American Honda Motor Co., Inc. – All Rights Reserved.
The following tools are available through the Honda Tool
and Equipment Program:
INSTALLATION
1. Turn the steering wheel fully counterclockwise.
2. Remove the self-tapping screws and clip.
3. Remove the self-tapping screws.
• Trim Tool Set (T/N SOJATP2014) • Rubber Roller (T/N MHLE54D) • Plastic Trim Tool
(T/N SILTRIMTL10)
CLIP
2 SELF-TAPPING
SCREWS
4. Remove the clips.
3 SELF-TAPPING
SCREWS
4 CLIPS
www.collegehillshonda.com
To Next Page
Loading...
Need help?
General
