110
uuIndicatorsuDriver Information Interface Warning and Information Messages
Message Condition Explanation
• Appears if there is a problem with the auto high-
beam.
• Manually operate the headlight switch.
• If you are driving with the high beam headlights when
this happens, the headlights are changed to low beams.
Message Condition Explanation
• Appears when you unlock and open the driver’s
door while the engine is running by remote engine
start.
2 Remote Engine Start with Vehicle Feedback
*
P. 439
Message Condition Explanation
• Appears if there is a problem with the adaptive
damper system.
• Have your vehicle checked by a dealer. With this message
appeared, your vehicle has normal damping ability
without the adaptive damper feature.
• Appears if the drive mode cannot be changed due
to certain situations, such as a system error or
adverse driving conditions.
2 SPORT Mode
*
P. 453
Models with auto high-beam
Models with remote engine starter
* Not available on all models
20 CIVIC 4D HCM_HMIN_J (KA KL KC)-31TBA6400.book 110 ページ ２０１９年６月７日 金曜日 午後４時４５分
To Next Page
Loading...
Need help?
General
