Honda CRF125F 2020 User Manual

154 Technical Information
Emission Control Systems
Exhaust Emission Requirements
The U.S. Environmental Protection Agency
(EPA), the California Air Resources Board
(CARB), and Environment and Climate
Change Canada (ECCC) require that your
motorcycle comply with applicable exhaust
emissions standards during its useful life, when
operated and maintained according to the
instructions provided.
The Vehicle Emission Control Information
Label (1) (2) is attached to the rear fender.
Noise Emission Requirements
The EPA also requires that motorcycles built
after January 1, 1983 comply with applicable
noise emission standards for one year or
1,865 miles (3,000 km) after the time of sale to
the ultimate purchaser, when operated and
maintained according to the instructions
provided. (USA only)
(2)
(1)
(1) vehicle emission control information label
(2) vehicle emission control information label
(Canada only)
REAR FENDER
20YM CRF125FFB_31K28B60_FM.book 154 ページ ２０１９年３月１日 金曜日 午後１時４８分

Honda CRF125F 2020 Specifications

General

Displacement	124.9cc
Bore and Stroke	52.4mm x 57.9mm
Compression Ratio	9.0:1
Valve Train	SOHC; two-valve
Ignition	CDI
Transmission	Four-speed
Front Suspension	31mm telescopic fork; 5.9 inches travel
Rear Brake	Drum
Front Tire	70/100-17
Rear Tire	90/100-14
Wheelbase	49.4 inches
Seat Height	29.1 inches
Fuel Capacity	1.0 gallon
Color	Red
Engine Type	Single-cylinder four-stroke
Final Drive	Chain
Rear Suspension	Single shock
Front Brake	220mm hydraulic disc
Curb Weight	194 pounds
Induction	Carburetor