Honda CRF250 RALLY 2018 User Manual

Air Cleaner
Changing Air Cleaner Element
Use a new Honda Genuine air cleaner
element or an equivalent specified for your
motorcycle.
NOTICE
Using the wrong air cleaner element may cause
premature engine wear or performance
problems.
1. Remove the right side cover. 2 P. 56
2. Remove the air cleaner housing cover by
removing the screws.
3. Release the tabs and pull out the air
cleaner element.
4. Install the new air cleaner element.
u
Make sure the air cleaner element is
installed securely.
5. Install the parts in the reverse order of
removal.
20171129160836_31KZZC100_enu_BOOK Page 70 Wednesday, November 29 2017 16:34:39 JST
Maintenance
67
Air cleaner element
Tabs
Screws
Air cleaner
housing cover
Screws

Honda CRF250 RALLY 2018 Specifications

General

Displacement	249.6 cc
Bore x Stroke	76.0mm x 55.0mm
Compression Ratio	10.7:1
Transmission	6-speed
Rear Brake	Single 220 mm disc
Front Tire	3.00-21
Rear Tire	120/80-18
Fuel Capacity	2.7 gallons
Starter	Electric
Final Drive	Chain
Ground Clearance	10.6 inches
Engine Type	Liquid-cooled single-cylinder
Fuel System	PGM-FI
Ignition	Fully transistorized
Front Suspension	43mm inverted fork
Rear Suspension	Pro-Link single shock
Front Brake	Single 256mm disc
Curb Weight	341 pounds