Honda CRF250RX 2022 User Manual

Caring for Your Vehicle
Frequent cleaning and polishing is important to
ensure the life of your Honda. A clean vehicle
makes it easier to spot potential problems.
While you're cleaning, be sure to look for
damage, wear, and gasoline or oil leaks.
Washing
Allow the engine, muffler, brakes, and other
high-temperature parts to cool before washing.
1. Rinse your vehicle thoroughly using a low
pressure garden hose to remove loose dirt.
2. If necessary, use a sponge or a soft towel
with mild cleaner to remove road grime.
u Clean the plastic components with extra
care to avoid scratching them.
Avoid directing water into the air cleaner,
muffler, and electrical parts.
u Do not use steel wool to clean the frame
as it could damage or discolor the frame
surface. Scotch Brite Hand Pad #7447-
maroon is for removing stains on the
non-coated aluminum frame only.
3.
Thoroughly rinse your vehicle with plenty of
clean water and dry with a soft, clean cloth.
4.
After the vehicle dries, lubricate any moving
parts.
u
Make sure that no lubricant spills onto
the brakes or tires. Brake discs, pads,
drum or shoes contaminated with oil will
suffer greatly reduced braking
effectiveness and can lead to a crash.
5.
Lubricate the drive chain immediately after
washing and drying the vehicle.
6.
Apply a coat of wax to prevent corrosion.
u Avoid products that contain harsh
detergents or chemical solvents. These
can damage the metal, paint, and plastic
on your vehicle.
Keep the wax clear of the tires and brakes.
u If your vehicle has any matte painted
parts, do not apply a coat of wax to the
matte painted surface.
Caring for Your Vehicle
Information
56

Honda CRF250RX 2022 Specifications

General

Displacement	249.4cc
Bore x Stroke	79.0mm x 50.9mm
Compression Ratio	13.9:1
Starter	Electric
Transmission	5-speed
Final Drive	Chain
Front Brake	Single 260mm disc with twin-piston caliper
Rear Brake	Single 240mm disc
Front Tire	80/100-21
Rear Tire	110/100-18
Wheelbase	58.3 inches
Seat Height	37.8 inches
Fuel Capacity	2.1 gallons
Engine Type	Single-cylinder four-stroke
Valve Train	DOHC; four valves
Induction	PGM-FI
Ignition	Full transistorized
Front Suspension	49mm inverted Showa fork with rebound and compression damping adjustability, 12.2 inches travel
Rear Suspension	Pro-Link Showa single shock with adjustable spring preload, rebound and compression damping; 12.3 inches of travel