Need help?Do you have a question about the Honda DREAM125 2018 and is the answer not in the manual?
Details on how to contact the Customer Relation Section via phone and email.
Explanation of DANGER, WARNING, CAUTION, and NOTICE signal words.
Guidelines to enhance rider safety and motorcycle operation.
Precautions for safe riding and passenger safety.
Importance of wearing approved motorcycle helmets and protective apparel.
Do not drink and ride, as alcohol impairs reaction time and judgment.
Running the engine in enclosed areas builds toxic carbon monoxide gas.
Follow guidelines during the first 500 km for motorcycle reliability and performance.
Observe guidelines for braking, including avoiding hard braking and continuous braking.
Steps to open the fuel fill cap.
Carefully inspect your motorcycle to ensure it is safe to ride.
Procedure for starting and warming the engine.
Close throttle and apply front and rear brakes together.
Do braking before entering corners and gradually reapply throttle when exiting.
Displays speed and total distance ridden.
Indicates the remaining fuel level.
Controls headlight operation and beam selection.
Operates turn signals and the horn.
Switches the electrical system on/off and locks the steering.
Step-by-step instructions for locking and unlocking the steering.
Procedure for starting a cold engine.
Procedure for starting the engine using the kickstart lever.
Procedure for starting a warm engine.
Steps to take if the engine does not start.
How to shift gears when stopping.
How to shift gears while moving.
Steps to securely install and close the fuel fill cap.
Petrol is flammable and explosive; handle fuel outdoors and keep away from heat.
Keeping the motorcycle well-maintained is essential for safety and performance.
Specifies maintenance requirements for safe and dependable performance.
Essential information and procedures for performing maintenance.
Well-maintained motorcycles ensure safety, protect investment, and maximize performance.
Safety guidelines to follow when performing maintenance.
Improper maintenance can cause a crash and serious injury or death.
Maintenance for fuel line, level, and strainer.
Cleaning air cleaner and checking/replacing spark plug.
Checking/changing engine oil and brake system maintenance.
Detailed checks to perform before riding the motorcycle.
Checking fuel level, throttle operation, and engine oil level.
Use only Honda Genuine Parts or approved equivalents for reliability and safety.
Installing non-Honda parts can make the motorcycle unsafe and cause crashes.
Steps to take if electrolyte splashes into eyes, skin, or mouth.
Batteries give off explosive hydrogen gas; handle with care and wear protective gear.
Fuses protect electrical circuits; check and replace blown fuses with the same rating.
Check and add engine oil if necessary.
Guidelines for choosing the correct engine oil based on standards.
Inspect and lubricate the drive chain regularly.
Check tyre air pressure regularly using a gauge.
Inspect tyres for cuts, cracks, damage, and abnormal wear.
Inspect tread wear indicators; replace tyres if they become visible.
Riding on worn or improperly inflated tyres can cause crashes and serious injury.
Use recommended tyre size, construction, speed rating, and load range.
Improper tyres can affect handling and stability, causing crashes and injury.
Steps to remove the motorcycle battery.
Steps to install the motorcycle battery.
Procedure for checking the spark plug's condition and electrodes.
Measure the distance the front brake lever moves before engaging.
Measure the distance the rear brake pedal moves before engaging.
Adjust the freeplay using the adjusting nut.
Check drive chain slack at several points; adjust if necessary.
Steps to diagnose why the engine will not start.
Procedures for dealing with a tyre puncture.
Diagnosing and resolving common electrical problems.
Procedures for repairing or replacing a punctured tyre.
Riding with temporary repairs is risky; ride slowly and carefully.
Procedure for charging a dead motorcycle battery.
Procedure to replace a burned-out light bulb.
Steps to remove the front wheel.
Steps to install the front wheel.
Install wheel, adjust freeplay, and adjust drive chain slack.
Specifications for overall length, width, height, wheelbase, ground clearance, and weight.
Details on engine displacement, bore, compression, and battery type.
Specifications for fuel, gear ratios, and reduction ratios.
Tyre size, type, recommended tyres, and air pressure.
Recommended spark plug types and engine oil specifications.
Drive chain lubricant, slack, type, links, and sprocket sizes.
Specifications for headlight, taillight, signal bulbs, and fuses.
Torque values for engine oil drain bolt, axle nuts, and brake stopper arm nut.
General| Brand | Honda |
|---|---|
| Model | DREAM125 2018 |
| Category | Motorcycle |
| Language | English |
To Next Page