Need help?Do you have a question about the Honda EB4000 and is the answer not in the manual?
Verify the engine oil is at the correct level before operation.
Ensure sufficient fuel is in the tank for operation.
Open the fuel valve to allow fuel flow to the engine.
Turn the engine switch to the ON position to enable starting.
Verify the engine oil is at the correct level before operation.
Ensure sufficient fuel is in the tank for operation.
Open the fuel valve to allow fuel flow to the engine.
Turn the engine switch to the ON position to enable starting.
General| Displacement | 196cc |
|---|---|
| Fuel Tank Capacity | 3.4 gallons |
| Starting System | Recoil |
| Noise Level | 58 dB |
| Dimensions (L x W x H) | 23.2 x 17.7 x 18.9 inches |
| Frequency | 60 Hz |
| AC Output | 120V |
| Rated AC Output | 3500W |
| Engine Type | 4-stroke, OHV |
| Rated Output | 3500W |
| Maximum Output | 4000W |
| Voltage | 120V |
| DC Output | 12V |
To Next Page
