Need help?Do you have a question about the Honda EM10000 and is the answer not in the manual?
General safety guidelines for using Honda generators, emphasizing safe operation and hazard awareness.
Outlines the user's duties for safe generator operation, including emergency procedures and supervision.
Details the dangers of carbon monoxide from exhaust and precautions for safe ventilation.
Warns about the risk of electrocution from generator use in wet conditions or improper connections.
Covers risks of ignition from hot exhaust and muffler, and keeping flammable materials away.
Provides instructions and warnings for safely refueling the generator, emphasizing ventilation and fire prevention.
Identifies the location and purpose of safety labels on the generator for hazard warnings.
Illustrates and identifies the main components and controls of the EM10000 generator models.
Details the function and operation of key controls including fuel valve, choke, engine switch, and circuit breaker.
Explains important features like the Oil Alert system and i-Monitor display for monitoring and protection.
Emphasizes safety and preparation for generator use, including reading the manual and understanding controls.
Stresses the importance of pre-operation checks for safety and equipment longevity, including problem correction.
Guides on checking engine oil, air cleaner, and fuel levels before starting the generator.
Instructs on checking the battery's electrolyte level to prevent damage and ensure proper operation.
Reviews essential safety guidelines and provides precautions for connecting appliances to the generator.
Provides step-by-step instructions for starting the generator engine, including choke and switch operation.
Details the procedure for safely stopping the generator engine under normal and emergency conditions.
Explains how to connect and operate AC appliances with the generator, including overload warnings.
Describes the three-phase/single-phase AC receptacle on the ET12000 and installation safety.
Details connecting cables for three-phase output (380V) on the ET12000, including cable specifications and safety.
Explains how to use single-phase output (220V) for one, two, or three circuits with load limits.
Covers connecting various AC appliances, power ratings, and limits for continuous and maximum operation.
Discusses connecting the generator to a building's electrical system, isolation switches, and utility requirements.
Explains the generator's system ground connection and its difference from a home receptacle ground.
Mentions applicable laws, local codes, and registration requirements for generator use, especially at construction sites.
Highlights why good maintenance is crucial for safe, economical, and trouble-free generator operation.
Provides essential safety precautions to follow before performing any maintenance or repairs on the generator.
Lists specific hazards to avoid during maintenance, such as CO poisoning, burns, and moving parts.
Presents a detailed schedule for regular maintenance tasks based on time intervals or operating hours.
Provides instructions for safely refueling the generator, including checking the fuel gauge and avoiding spills.
Specifies the type of gasoline to use, including octane ratings and precautions for gasohol mixtures.
Details the types of gasohol, acceptable alcohol content, and potential warranty issues with improper fuel use.
Guides on how to check the engine oil level using the dipstick and the importance of maintaining the correct level.
Provides instructions for draining and refilling the engine oil, including oil capacity and proper disposal.
Recommends the type and viscosity of engine oil based on ambient temperature for optimal performance.
Explains how to inspect, clean, and replace the air filter elements for proper engine performance.
Details the specific procedure for cleaning the foam air filter element using soap water or solvent.
Provides instructions for cleaning the fuel sediment cup and replacing the O-ring, with safety warnings for fuel handling.
Guides on inspecting, gapping, and replacing spark plugs to ensure proper engine ignition and operation.
Explains how to service the spark arrester screen by removing carbon deposits to maintain its function.
Covers battery maintenance, including charging, safety precautions, and emergency procedures for electrolyte contact.
Details how to check the battery's electrolyte level and inspect each cell for proper operation and maintenance.
Provides step-by-step instructions for safely removing the battery, including disconnection order and handling precautions.
Explains how to charge the battery safely, including warnings about hydrogen gas and charging current recommendations.
Guides on how to correctly install the battery, connecting positive and negative cables securely.
Explains the function of the fuse, how to check it, and the importance of using the correct replacement rating.
Covers essential steps for preparing the generator for storage, including cleaning and fuel system management.
Details how to clean the generator exterior and protect it from rust during storage.
Discusses fuel deterioration during storage and recommendations to prevent engine damage.
Explains how to use a gasoline stabilizer to prolong fuel life during storage and the engine run-in procedure.
Provides detailed steps for draining the fuel tank and carburetor to prepare the generator for long-term storage.
Lists precautions for storing the generator, focusing on ventilation, avoiding ignition sources, and preventing moisture.
Guides on checking the generator after storage, refueling, and what to expect during the first startup.
Addresses common engine issues like 'Engine Will Not Start' and 'Engine Lacks Power', listing causes and corrections.
Details troubleshooting steps for 'No Power at the AC Receptacles', identifying possible causes and solutions.
Shows where to find the engine and frame serial numbers for parts ordering and warranty inquiries.
Explains the need for carburetor adjustments at high altitudes and the effects on performance and emissions.
Lists detailed specifications for the EM10000 generator, including dimensions, engine, and AC output.
Provides specifications for the ET12000 generator, covering dimensions, engine, and AC output details.
Lists tune-up specifications such as spark plug gap and valve clearance, and refers to maintenance pages.
Presents the wiring diagram for EM10000 generators of R and K types, detailing components and wire colors.
Shows the wiring diagram for EM10000 generators of U type, illustrating electrical connections and components.
Details the wiring diagram for EM10000 generators of M type, including electrical schematics and component layout.
Provides the wiring diagram for the ET12000 generator, illustrating its electrical system and connections.
Instructions for installing the optional wheel kit, including component assembly and torque specifications.
Details the installation procedure for the optional hanger kit, including bracket mounting and bolt tightening.
To Next Page
General
