−
−
49
SERVICING YOUR GENERATOR
Recommended spark plugs:
SPARK PLUG SERVICE
SPARK PLUG WRENCH
0.7 0.8 mm
SIDE ELECTRODE
INSULATOR
SEALING WASHER
SPARK PLUG CAP
ZFR5F (NGK)
FR2A (NGK)
0.7 0.8 mm
The gap should be:
Measure the spark plug
electrode gap with a wire type
feeler gauge. Correct the gap, if
necessary, by carefully bending
thesideelectrode.
Inspect the spark plugs. Replace
them if the electrodes are worn
or if the insulator is cracked,
chipped, or fouled.
Disconnect the spark plug caps, and remove any dirt from around
the spark plug area.
If the engine is hot, allow it to cool before servicing the spark plug.
An incorrect spark plug can cause engine damage.
To ensure proper engine operation, the spark plug must be properly
gapped and free of deposits.
Remove the spark plugs with a spark plug wrench.
1.
2.
3.
4.
11/12/06 12:57:48 42Z26700_051
To Next Page
Loading...
Need help?
General
