Basic Operation & Riding
98
Riding in Reverse
If you need to ride in reverse, make sure the area behind you is clear
and only operate the ATV at low speed.
1.
Bring the vehicle to a complete stop with brakes, and holding the brakes.
2.
Be sure there are no obstacles or people in the way.
3.
Press and hold the reverse switch (2), then press the downshift
switch ( ) (1) within 10 seconds to shift into “R” reverse gear.
You can also shift into “R” reverse gear by pressing and holding
the downshift switch ( ) (1), then pressing the reverse switch (2)
within 0.5 seconds.
4.
Make sure that the reverse indicator comes on and the gear
position indicator shows “R”.
Improperly operating in reverse could cause
you to hit an obstacle or person behind you,
resulting in serious injury.
Make sure there are no obstacles or people
behind you before selecting reverse gear.
When it is safe to proceed, go slowly.
LEFT HANDLEBAR
(2)
(2) reverse switch
(3) upshift switch
(1)
(3)
(1) downshift switch
To Next Page
Loading...
Need help?
General
