Honda FR750 - Page 40

SERVICING YOUR HONDA TILLER
DRIVE BELT ADJUSTMENT
1. Adjust the clutch сабіе (раде 39).
Remove the belt cover, and pinch the upper and lower parts of the belt
together with both hands five or six times.
Belt tension is correct when the distance form the top of the belt
to the top of the tension roller is 1.65- 1.77 іп (42—45 mm) when the clutch
is engaged.
1.65 – 1.77in
(42 – 45mm)
2. To adjust, loosen the four engine mounting bolts and the belt stopper
attaching two bolts (front side) and move the engine forward or backward
to get proper tension on the belt.
Ж
Her Wh
Е! Ө у
BELT STOPPER
ATTACHING BOLTS
ENGINE MOUNTING BOLTS
38