Honda FR750 - Page 41

SERVICING YOUR HONDA TILLER
During adjustment, line up the groove of the engine-side pully and thet of the
transmission-side pulley. If they are not aligned, the belt may come off or will
wear prematurely.
ENGINE-SIDE PULLEY TRANSMISSION-SIDE PULLEY
3. Loosen the belt stopper attaching bolts. Adjust the clearance between the
belt stopper and the belt as illustrated with the clutch lever squeezed.
{1 - 3mm)
“Бер
d N
=
м 22% сой
— 0,55 — 0.63in 220-12 - 0.20іп
= (14-16тт} (%-5тт)
39