Need help?Do you have a question about the Honda GL1200 Aspencade 1985 and is the answer not in the manual?
General| Displacement | 1182 cc |
|---|---|
| Transmission | 5-speed |
| Final Drive | Shaft |
| Front Tire | 120/90-18 |
| Rear Tire | 140/90-16 |
| Ignition | Electronic |
| Front Suspension | Air-assisted telescopic fork |
| Rear Suspension | Air-assisted Pro-Link |
| Front Brakes | Dual hydraulic discs |
| Rear Brakes | Single disc |
| Engine Type | Liquid-cooled, four-stroke, opposed Boxer four-cylinder |
Motorcycle capacity limits for rider and passenger.
Motorcycle is designed for road use only; obey laws.
Pay attention to warnings, cautions, and notes in the manual.
Read all warning labels before riding.
Effects of accessories/cargo on safety, weight limits.
Importance of pre-ride checks before starting the engine.
Rider qualification, visibility, laws, and road caution.
Always wear a helmet; avoid loose clothing near controls.
Locates handlebar controls, dashboard instruments, and fluid reservoirs.
Explains odometer, tripmeter, gauges, and control buttons.
Describes various warning lights and indicators and their functions.
Details on front and rear brake systems and fluid levels.
Checks and procedures for fuel and engine oil systems.
Information on tubeless tires, pressure, and wear.
Operation of ignition switch, engine stop, and starter button.
Describes headlight dimmer, horn, and turn signal switches.
How to use steering lock, helmet holder, and storage compartments.
Operation of the motorcycle radio and cassette deck.
Steps before starting and procedures for various temperatures.
Guidelines for the first 600 miles and required maintenance.
Recommended shift points for up and down shifting.
Unified system operation, techniques, and safety warnings.
Schedule for emission and non-emission related maintenance.
List of tools included in the kit for roadside repairs.
Stop engine, secure motorcycle, use genuine parts.
Steps to drain engine oil and replace the oil filter.
Steps to remove and install wheel components and the wheel.
Steps to remove rear components, axle, and the wheel.
How to inspect brake pad wear and when to replace.
Checking electrolyte level and breather tube routing.
Locating fuses and safe replacement procedures.
Procedures for cleaning the motorcycle and aluminum wheels.
Steps for preparing and removing the motorcycle from storage.
Overall dimensions, weight, and fluid capacities.
Engine details, spark plug gap, idle speed, electrical components.
Exhaust, noise, evaporative, and crankcase emission controls.
Steps to take if unsatisfied with service.
To Next Page