Honda HS828 - Page 64

HS928
HONDA
HSB2B
b. INSPECTION
• PISTON SKIRT O.D.
Measure and record the piston 0.0. at a point 10 mm (0.4 in) from
the bottom of the skirt and
90° to the piston pin bore
STANDARD
SERVICE LIMIT
72.74 mm {2.864 in)
72.62 mm {2.859
on)
• PISTON-TO-CYLINDER CLEARANCE
--
STANDARD SERVICE LIMIT
0.26-0.307 mm
0.55 mm {0.022 in)
{0.0102- 0.0121 in)
• PISTON RING SIDE CLEARANCE
STANDARD
0 015 - 0.045 mm
(0.0006- 0.0018 in)
• PISTON RING END GAP
STANDARD
Top/ 0.2 -0.4mm
2nd/oil (0.01 - 0.02 in)
NOTE:
SERVICE LIMIT
0.15 mm {0.006 in)
SERVICE LIMIT
1.0 mm (004 in)
• Use the top of the piston to position the ring horizontally in
the cylinder.
• PISTON PIN O.D.
STANDARD
18.00 mm {0.709 in)
~--
----
SERVICE LIMIT
17.954 mm {0.707 in)
10 mm (0.4)
MICROMETER
0