Honda HS828 - Page 65

HS928
• PISTON PIN BORE I. D.
STANDARD
SERVICE LIMIT
18.002 mm (0.7087 in) 18.048 mm (0 7105 in)
o PISTON PIN-TO-PIN BORE CLEARANCE
STANDARD
0.002- 0.014 mm
(0.0001 - 0.0006 in)
SERVICE LIMIT
0.08 mm (0 003 in)
o CONNECTING ROO SMALL END I. D.
E
STANDARD SERVICE LIMI:c.T ___ _
_ 18 005 mm (0.708•:9-'m'.'>)'____L _ __'1_-:8:::.0-.:7..'m".m~(O':'C.C'.7C.1 c_1 .:c'nc_) __
o CYLINDER BORE I. D.
Measure and record the cylinder LD_ at three levels in both an X
andY axis. Take the maximum reading to determine the cylinder
wear.
-------------.-----------,
SERVICE LIMIT STANDARD
73.00 mm (2.874 in) 73.17 mm (2.881 in)
CRANKSHAFT
CRANKSHAFT BEARING (6206)
REASSEMBLY:
1) Coat the inner bearing with oil and press the bearing onto
the crankshaft
using the special tools.
TOOLS:
DRIVER,
40 mm I.D.
ATTACHMENT. 30 mm I.D.
07746-0030100
07746-0030300
( s TOOL I
DRIVER. 40 mm I.D.
07746-{)0301 00
( s -;-;;OL I
HONDA
HSB2B
A IT AC H ME NT, __ _::;,;t.,.o~
30 mm I. D.
07746-0030300