4. Move the shift lever to select the desired gear position. The clutch will
engage automatically in about one second.
CAUTION: If clutch engagement occurs immediately or takes longer than
one second, have the riding mower serviced by your HONDA dealer.
l
Be sure the area behind the mower is clear of people, pets and other
obstacles before backing up.
l
Operate the mower at low speed until you become familiar with all of its
operating characteristics.
UPHILLSTARTING PROCEDURE
rnml
If possible, avoid stopping the riding mower while driving uphill.
However, if it is necessary to stop, follow this special procedure:
A. Set parking brake.
B. Apply pressure to the brake pedal.
C. Move the throttle lever to mid range.
D.Shift the transmission to 1st gear position.
E. Release the brake pedal.
F. Wait until the clutch engages.
G.Then release the parking brake lever.
EwlMl
If the parking brake lever is released before the brake pedal, the
riding mower may roll downhill before the clutch engages. This may cause the
riding mower to tip over.
28
To Next Page
Loading...
Need help?
General
