Honda Interceptor 2014 - Page 117

Electrical Trouble u Burned-out Light Bulb
115
Troubleshooting
8. Install a new bulb and parts in the reverse
order of removal.
u Install the socket by aligning its arrow
mark with “ ”, then turn it clockwise
until aligning its arrow mark with “ ”
to lock it.
u Use only the amber bulb.
❙
License Plate Light Bulb
1. Remove the screws.
2. Remove the license light cover and license
light cover packing.
3. Pull out the bulb without turning.
4. Install a new bulb and parts in the reverse
order of removal.
Socket
Bulb
Tab
Arrow mark
Turn signal
connector
“” mark
“” mark
Screws
Bulb
Packing
License light cover