Removing & Installing Body Components u Battery
72
Battery
❙
Removal
Make sure the ignition switch is off.
1.
Remove the battery cover.
2
P. 71
2.
Unhook the rubber strap.
3.
Disconnect the negative
-
terminal from
the battery.
4.
Disconnect the positive
+
terminal from
the battery.
5.
Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
+
terminal first. Make sure that bolts and nuts
are tight.
Readjust the clock after the battery is
reconnected since the clock goes wrong
once the battery disconnected.
For proper handling of the battery, see
“Maintenance Fundamentals.”
2
P. 54
“Battery Goes Dead.”
2
P. 110
Negative terminal
Battery
Positive terminal
Rubber strap
To Next Page
Loading...
