Honda Interceptor 2014 - Page 30

28
Instruments (Continued)
Operation Guide
If the ignition switch is turned off, the button
is not pressed for about 30 seconds, or the
handle grip heater level is changed, the
control is automatically switched from the
setting mode to the ordinary display.
If the button is not pressed for about
30 seconds or the handle grip heater level is
changed, items in the process of being set
will be discarded and only items where
settings have been finalized will be applied.
Only if the ignition switch is turned off will
items in the process of being set and those
that are finalized be applied.
1 Clock setting:
!a Turn the ignition switch ON.
!b Press and hold button and button,
the hour digits start flashing.
!c Press button until the desired hour is
displayed.
u Press and hold button to advance the
hour fast.
!d Press button. The minute digits start
flashing.
!e Press button until the desired minute is
displayed.
u Press and hold button to advance the
minute fast.
!f Press button. The clock is set, and then
the display moves to the backlight
brightness adjustment.
A
B
A
A
B
A
A
B