Honda Interceptor 2014 - Page 79

Engine Oil u Changing Engine Oil & Filter
77
Maintenance
11. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
12. Install a new oil filter and tighten.
13. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
14. Fill the crankcase with the recommended
oil ( 2 P. 57) and install the oil fill cap.
15. Check the oil level. 2 P. 73
16. Check that there are no oil leaks.
17. Return the radiator to the original
position and tighten the bolt securely.
18. Install the parts in the reverse order of
removal.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
Required oil
When changing oil & engine oil
filter:
3.3 US qt (3.1 liters)
When changing oil only:
3.1 US qt (2.9 liters)