Honda NC750X 2018 User Manual

Maintenance Lid
#
Removal
1. Open the luggage box. 2 P. 70
2. Remove the screws.
3. Remove the maintenance lid.
#
Installation
1. Install the maintenance lid.
2. Install and tighten the screws.
Torque: 2.2 lbf·ft (3 N·m, 0.3 kgf·m)
3. Close the luggage box.
20180125134256_31MKL6000_enu_BOOK Page 102 Thursday, January 25 2018 13:52:25 JST
Removing & Installing Body Components u Maintenance Lid
Maintenance
99
Maintenance lid
Screws

Honda NC750X 2018 Specifications

General

Bore x Stroke	77 mm x 80 mm
Compression Ratio	10.7:1
Fuel System	PGM-FI electronic fuel injection
Ignition	Digital transistorized with electronic advance
Final Drive	Chain
Front Tire	120/70ZR-17
Rear Tire	160/60ZR-17
Seat Height	32.7 inches
Fuel Capacity	3.7 gallons
Engine Type	Liquid-cooled, parallel-twin
Horsepower	54 hp
Max Power Output	54 hp (40.3 kW) @ 6, 250 rpm
Torque	50.1 lb-ft (68 Nm) @ 4, 750 rpm
Transmission	6-speed manual
Front Suspension	41 mm telescopic fork; 5.4 inches travel
Rear Suspension	Pro-Link single shock
Front Brake	320mm single disc with two-piston caliper
Rear Brake	240mm single disc with single-piston caliper