Honda Odyssey 2021 - Page 93

91
uuIndicatorsu
Continued
Instrument Panel
Indicator Name On/Blinking Explanation Message
Automatic Brake
Hold System
Indicator
• Comes on when the automatic
brake hold system is on.
2 Automatic Brake Hold P. 644
Automatic Brake
Hold Indicator
• Comes on when the automatic
brake hold is activated.
2 Automatic Brake Hold P. 644
—
Malfunction
Indicator Lamp
• Comes on when you set the
power mode to ON, and goes off
when the engine starts, or after
several seconds if the engine did
not start. If “readiness codes”
have not been set, it blinks five
times before it goes off.
• Comes on if there is a problem
with the emissions control system.
• Blinks when a misfire in the
engine’s cylinders is detected.
• Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 767
• Comes on while driving - Have your
vehicle checked by a dealer.
• Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take your vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 742
U.S.
Canada
21 US ODYSSEY-31THR6310.book 91 ページ ２０２０年６月１７日 水曜日 午後２時４６分